The selection of C-type high-speed punch is mainly determined according to the nature of the stamping process, the size of the production batch, the geometry, size and accuracy requirements of the stamping parts. There are many types of stamping equipment commonly used in stamping production. The fo......

In the production process before using the high-speed punching machine, due to the difference in the structure, shape, size, precision requirements and production volume of the stamping parts, as well as the specific production conditions and other factors, when the customer purchases the Jiawang hi......

The following is to tell the press manufacturer to share with you the site selection considerations for high-speed presses.

1. The unwinding and uncoiling material racks are selected by plane electronic feeder. The high speed punch press has narrow width, thin thickness, and fast speed requirements. The uncoiling speed of 16m per minute for ordinary vertical material racks is far from meeting the needs of high-speed punc......

1. The material of the product must be a metal material to be able to carry out the h-type high-speed punch. 2. The thickness and total width of the product, generally higher than 5 mm, are not suitable for high-speed stamping, and the total width of the stamped product is restrained by the high-sp......

After more than ten years of development, the technical level of precision high-speed punching machines has been gradually improved. Although the safety of the punching machine is getting better and better, the operator of the high-speed precision punching machine also needs to have a sense of crisi......